The 8T Water Treatment Part is a membrane separation technology device with a porous asymmetric structure.
The filtration process is a solution separation process based on the pressure difference between the two sides of the membrane, based on the principle of mechanical screening.
Description
The 8T Water Treatment Part is a membrane separation technology device with a porous asymmetric structure. The filtration process is a solution separation process based on the pressure difference between the two sides of the membrane, based on the principle of mechanical screening. The pressure is usually 0.1-0.3Mpa, and the pore diameter of the ultrafiltration membrane is approximately 0.005-1μm. The molecular weight cut-off is between 1000 and 500,000 Daltons, so the ultrafiltration membrane separation process was once considered a pure physical separation process.
Specification
Product Name | Water filter system with atural rubber inside |
Item Type | Water treatment plant |
Place of Origin | Jiangsu, China (Mainland) |
Material | SS304 / SS316 |
Capacity | 0.5-100 ton/hour or customized |
Online of RO | TDS and PH Meter |
Total disolved solids | Customized |
Voltage | Customized |
Dimension | Customized |
Control | PLC Inverter |
Suitable raw water | River, underground water, mountain water |
Function | Water purification |
Warranty | 12 months |
Certification | CE,ISO,SGS |
The 8T Water Treatment Part has three situations:
1) Solutes are adsorbed on the surface of the membrane and on the walls of the micropores (primary adsorption).
2) The particle size of the solute is similar to the pore size of the membrane, and the solute is mechanically trapped on the membrane surface to achieve sieving (blocking).
3) The solute of the solute is larger than the pore size of the membrane, and the solute is mechanically trapped at the surface of the membrane to achieve sieving.